Air Brake Accessories

Air Brake Tubing
Fuel Line and Vapor Emission
Gladhand Couplings
Air Brake Hose
Remote Control Drain Valves
Coiled Airbrake Tube Assemblies
Brass Fuel Hose Fittings



Air Brake Tubing

  • SAE J844, Type 3 A & B & DOT FMVSS 106
  • Nylon inner tube with open ply nylon fiber reinforcement and nylon cover.
  • -40° F to +200° F temperature range.
  • 150 P.S.I. max. working pressure

    NOTE: The Synflex, Parker and Eaton tubing must be torqued at 47 in. pounds.
  • Simply push tubing in, no tools. Saves up to 75% of assembly time of standard compression fittings.

    *Any other 5/32 DOT tubing used, tubing or fitting manufacturer should be contacted for proper torque requirements.

Fuel Line and Vapor Emission

  • SAE 30R7
  • Nitrile tube w/ spiral synthetic cord, hypalon cover.
  • 50 p.s.i. working pressure. 1/2 -35 PSI
  • -40° F to + 257° F temperature range.
  • Low pressure/ high temperature fuel for cars, light trucks, and small engines.
  • Meets SAE J1402

Gladhand Couplings

  • Die Cast Aluminum Body
  • Conforms to SAE J318
  • Connects to 1/2” pipe

Air Brake Hose

  • Spiral synthetic cord reinforcement with neoprene cover.
  • -40° F to +200° F temperature range.
  • Max opperating pressure 255 psi
  • Max burst pressure 900 psi
  • Meets SAE J1402

Remote Control Drain Valves

  • Brass Body and stainless steel spring
  • Steel cable, nylon coated, certified to 200lbs pull test.
  • Low profile to minimize accidental hits and damages.
  • Pipe thread 1/4” NPTF.
  • To order pre-coated pipe threads, add prefix “P” to the part number.

Coiled Airbrake Tube Assemblies

  • Conforms to SAE J844 Type B and SAE J1131.
  • Conforms to DOT FMVSS 571. 106.
  • Maximum Working Pressure 150 PSI,
  • Minimum Burst 950 PSI.
  • Temperature Range -400 F to 2000 F.
  • Brass end with spring guards and 1/2” male pipe connectors.
  • Spring guards zinc plated for maximum corrosion resistance.
  • Color coding, red for emergency and blue for service, provides you with error free installation.
  • Preassembled for immediate installation.
  • 1/2” O.D. with 1/2” fitting.

Brass Fuel Hose Fittings

  • Typical Application:
    Low pressure air, fuel and oil applications. Generally used for automotive, light truck, and small engine fuel lines. Use with fuel hose SAE 30R7 & SAE 30R9.
  • Advantages:
    Easy to assembly, just push the fitting into the hose clamp. Good selection of configurations at reasonable cost.