Hose Clamps

1/2" band clamps
Miniature Clamps
Quick Release 500/550 Series
Worm Gear Hose Clamps
T-Bolt Clamps
Carbon Steel 1-Ear Clamps
One Piece 1-Ear Clamps
2-Ear Clamps
Gapless Ear Clamps
F-Clamps
K-Clamp
FLJ-Clamp
FLJS-Clamp
Clamp-It


1/2" Band Clamps

Applications: A general purpose clamp for automobiles, plumbing, home and garden general clamping applications, with anti-corrosive properties varying with the number of components made from stainless steel.

600 Series

  • 5/16" Hex Slotted Carbon Steel Screw
  • 1/2" Wide 201 Stainless Steel Band
  • Carbon Steel Housing
611 Series
  • 5/16" Hex Slotted Carbon Steel Screw
  • 1/2" Wide 201 Stainless Steel Band
  • 301 Stainless Steel Housing
620 Series - Use for marine, underground and other high corrosive application
  • 5/16" Hex Slotted 305 Stainless Steel Screw
  • 1/2" Wide 301 Stainless Steel Band
  • 301 Stainless Steel Housing

Miniature Clamps - 5/16" Band

Applications: For marine, agricultural, industrial and automotive uses. Corrosion resistance varies with stainless components.
*Mechanically interlocked, 3 piece construction for service sealing pressure without spot welding.

300 Series

  • 1/4" Hex Slotted Carbon Steel Screw
  • 5/16" Wide 301 Stainless Steel Band
  • Carbon Steel Housing
325 Series
  • 1/4" Hex Slotted Carbon Steel Screw
  • 5/16" Wide 301 Stainless Steel Band
  • 301 Stainless Steel Housing
350 Series
  • 1/4" Hex Slotted 410 Stainless Steel Screw
  • 5/16" Wide 301 Stainless Steel Band
  • 301 stainless Steel Housing

Quick Release 500/550 Series

These clamps feature a unique quick release design between the one piece housing and band allowing for quick and easy installation in restricted or difficult areas.

Applications: Quick release action permits easy installation in applications where clamp must be opened to be applied. Quick release clamps are used extensively in the telecommunications industry on cable enclosures where open air application demands durability.
*Open/Close design allows easy installation.

500 Series

  • 5/16" Hex Slotted Carbon Steel Screw
  • 1/2" 301 Stainless Steel band
  • 301 Stainless Steel Housing
  • 410 Stainless Steel Bridge
550 Series
  • 5/16" Hex Slotted 410 Stainless Steel Screw
  • 1/2" 301 Stainless Steel band
  • 301 Stainless Steel Housing
  • 410 Stainless Steel Bridge


Worm Gear Hose Clamps 830 Series

Interlock Construction: no welds, no bumps, which strengthens under tension to ensure maximum torque application

T-Bolt Clamps

Opens 1/16" above and tightens 1/8" smaller then nominal I.D. for a total of 3/16" range for clamps sizes 150 through 250. Opens 1/16" above and tightens 7/32" smaller then nominal I.D. for clamps sizes 256 through 750

Purpose: To provide a quick, yet effective means of clamping a variety of fittings to a wide range of hose. T-Bolts can be applied with a standard 7/16” socket wrench. They provide 3600 sealing surface by using a shoe or formed bridge.

Services: The T-Bolt clamp is a high strength, reliable clamp with numerous applications in both the commercial and industrial markets including hose and ductwork connections for air, oil, water and other types of low pressure fluid lines.

  • All designs meet SAE J1508 specifications.
  • .025” Band Thickness
  • 3/4” Wide Band
  • Band Material: 300 Series Stainless Steel
  • Bolt Material: 300 Series Stainless Steel
  • Nut Material: 300 Series Stainless Steel
  • Nuts are Self-locking
  • Torque Rating 75 in/lb


Carbon Steel 1-Ear Clamps


1-Ear Clamps are intended for low pressures applications such as automotive (not fuel lines), appliances, industrial machinery, underground irrigation systems and beverage dispensing equipment. They are specifically designed for mass production applications where inexpensive clamps are needed.

Pressure:
As a guideline, 1-Ear Clamps have held 30 bar - 441 psi.
This was done using a static water pressure test.

Material:
Hot dipped galvanized carbon steel band - G90

One Piece 1-Ear Clamps

  • Smooth inner band surface protects hose other material when subjected to pulsation, expansion, or contraction
  • One piece design offers quick and easy installation
  • Used in places where clamping a second ear is impractical
  • For air and fluid media lines

Material:

  • Zinc plated-steel SAE 1008/1010 or DIN 1.0338
  • Stainless steel UNS S30400 or DIN 1.4301


2-Ear Clamps


2-Ear Clamps are especially suited for industrial use and with heavily vibrating equipment.

This is a medium pressure clamp and is widely used for maintenace and OEM applications. Rubber hose, plastic tubing, coaxial and electrical cable, rope, etc. are all easily clamped. These clamps are installed on air, fluid, gas and steam lines. The one piece design offers a positive, tamper-proof seal without damaging the hose.

Pressure:
As a guideline, 2-Ear Clamps successfully seal at 54 bar - 800 psi with 35 pulsating strokes a minute.

Material:
Zinc plated carbon steel SAE 1008/1010 or DIN 1.0338
Stainless steel tubing UNS S30400 or DIN 1.4301

Gapless Ear Clamps


Features:
  • Assured clamping seal
  • For low durometer and/ or thin-walled hose/ tubing
  • Perfect for silicon, vinyl, polyurethane or other high tech materials used in all industries.
  • Once installed, smooth inner bancircumference prevents damage to the hose while the unique tongue-in-groove design provides a 360° seal
  • There are no steps or gaps inside clamp

Material:

  • Stainless steel tubing UNS S30400 or DIN 1.4301

F-Clamps


Open End Clamps:
Open End Clamps are of the same general construction as the preformed clamps with this exception, the double wrapping of the band around the hose or article is part of the application. The open end clamps are used when one end or both, of the article to be clamped is not free, or an obstruction prevents slipping a preformed clamp over the end.

Preformed Clamps:
Preformed Clamps are double wrapped and formed to a given diameter. Used primarily where one end of the hose or article is free to allow the clamps to be slid over the hose end before the fitting is inserted. All clamps may be pulled down to a smaller diameter but cannot be adjusted to a larger diameter.

K-Clamp Preformed Hose Clamps

Each clamp is a double wrapped metal band formed to a given diameter. The clamp is designed to be slid over the hose end before the fitting is inserted. A punch-type or fold-up tool is then used to apply the clamp.

Center Punched: Less tension loss. Patented hole in inner band gives better internal mechanical locking after punching

*Heavy Duty lock for greater strength and rigidity!

Note: K-Clamps may be secured by either a punch or fold-up method.

FLJ-Clamp Preformed Hose Clamps


Features:
J-Clamps are available in 3/8”, 5/8” and 3/4” widths, from 13/16” to 8” I.D. These non punch type clamps are to be secured by the foldup method, using the Wind-Up tool, our part no. KS001 and adapter KA001.

FLJS-Clamp Smooth I.D. Clamps


FLJS:
Clamps are double wrapped clamps with a more smooth inside diameter, intended for your thermoplastic and other thinner wall hose clamping applications. The JS series clamps slide on the hose prior to inserting the fitting.

Preformed JS:
Clamps are available in 5/8” and 3/4” widths, 1” I.D. to 8” I.D. in 1/4” increments.

The FLJS:
Clamp is intended to be applied with a KS001 tool or other comparable fold-up locking tool.


Clamp-It

The multi-sized clamps all rolled up in one..for your unknown requirements for 1 inch to 30 feet, be they round or otherwise. Clamp-It products will fill your needs. This Strapping in widths of 3/8”, 1/2”, 5/8”, and 3/4” stainless or galvanized steel, as are the clamps (buckles).

Orbitor-Used to apply Clamp-It continuous strapping up to 3/4" width.
A tool of endless travel... this lightweight, side entry, jack-type tool is the most rapid cinch-up application tool in its field. The Orbitor C-2 Loking Tool will handle Clamp-It strapping widths to 3/4” and always reached desired tension without fear of losing travel capacity of the tool. The Clamp-It Strapping, Clamp-It Clamps, and the unique Clamp-It tool add up to a superior system for you.