Push-In Fittings

Brass
Nickel Plated
Ball Valves
Composite Body
Metric



Brass

  • QUICK CONNECT
  • Simply push tubing in, no tools. Saves up to 75% of assembly time of standard compression fittings.
  • QUICK DISCONNECT

  • Hold two fingers on insert and pull tubing out, no tools required.
  • REUSEABLE
    Connect and disconnect numerous times.
  • FULL FLOW DESIGN
    Provides up to 60% more flow area than conventional fittings with internal tube supports.
  • POSITIVE SEAL
    No leaks. After tubing is inserted, seal is made.
  • VERSATILE
    BunaN "O" rings standard. Other materials of "O" rings available.
  • SECURE TUBE RETENTION
    Pulling on tubing only serves to tighten the connection.
  • SELF CONTAINED ASSEMBLY
    No loose parts, brass body and insert.
  • BRASS CONSTRUCTION
    Elbows and tees are forged brass.
  • CHOICE
    Of convenient swivel of economical stationary elbows and tees.
  • STRAIGHT CONNECTORS
    Have interior hex for Allen key tightening where space is limited...no need to use a wrench.
  • PRE-APPLIED TEFLON ®
    Based pipe sealant on all male pipe threads, saving customer additional labor.
  • METRIC SIZES AVAILABLE:
    Metric tube sizes from 2mm through 12mm in both standard NPT and metric pipe sizes are available on a special order basis.
  • WORKING PRESSURE:
    The fitting is suitable for use up to the maximum working pressure of the plastic tubing used. For soft copper tube, a maximum working pressure of 750 PSI is recommended. Also suitable for vacuum service.
  • WORKING TEMPERATURE:
    -10°F to 200°F (other ranges available on request).
  • PIPE THREAD: NPTF with Teflon ® based sealant pre-applied.
  • Tolerance
    +/- .02 on all dimensions. Dimension data can change without notice. Please contact us when dimensions are critical.

Nickel Plated

Component Parts and Materials

Body

Brass - Nickel Plated
Thrust Ring Plastic
Sleeve Brass - Nickel Plated
Gripper Collet Stainless Steel
Safety Ring PA66
Lip Seal (1/8 O-Ring Seal) NBR 70
Thread Seal NBR 70
  • Max Operating Pressure: 0-250 psi (17 bar ) Vacuum service.
  • Min Temperature: 0°F ( -18°C )
  • Max Temperature: 160°F ( +70°C )
  • Tubing: Nylon, Polyethylene, Polyurethane.
    - For best results use 95 Durometer
  • Media: Compressed air, water
  • Tolerance
    +/- .02 on all dimensions. Dimension data can change without notice. Please contact us when dimensions are critical.

Ball Valves

  • Pressure Range:
    0-250 PSI (17 bar) Vacuum Service
  • Temperatures:
    Minimum: 0F (-18C)
    Maximum: 160F (70C)
  • Media:
    Air, Oil, Water and Gas. (Consult factory for seal compatibility)
Components
Materials
Body
Chrome plated brass
Ball Seats
Teflon
Stem Seal
NBR 70 (Viton & other compounds on request)
Stem
Chrome plated brass
Handle
Glass filled nylon
Color Plate
Nylon (Std. Blue, optional: green, yellow, red and white)
Handle Screw
Steel - Plated for corrosion resistance
Ball Retainer Seal
NBR 70 (Viton & other compounds on request)
Ball Retainer
Chrome plated brass
Ball
Chrome plated brass

Composite Body


Specifications
  • Fluid Admitted
    Air
  • Working pressure range
    0-150 PSI (10BAR)
  • Min. Burst pressure340PSI
    (23BAR)
  • Working Temperature range
    -104°F - 180°F (-76°C - 82°C)
  • Tolerance
    +/- .02 on all dimensions. Dimension data can change without notice. Please contact us when dimensions are critical.
Materials of Construction:
Body Composite Plyacetal
Body Brass
Tube Release Acetal Resin
Retainer Brass
Gripper Ring Stainless Steel
Spacer Brass
O-Ring NBR 70
Threads Brass w/ white sealant

Note:The latest generation of composite material is used in the body construction in addition to brass on threaded components
and stainless steel on the tube gripper.

Metric

  • Operating Range
    Pressure: 0 to 220 PSI (15 bar)
    Vacuum: 0 to 29mmhg (-.99 bar)
  • Temperature
    -5F to 175F (-20C to 80C)
  • Media
    Compressed air
    Non-toxic fluids (water)
  • Global Threads -Work with Inch or Metric Threads
    Fittings can be assembled with female threads produced to the following standards:
    1. Tapered NPTF
    2. Parrallel (BSPP, BSP, ISO 7)
    3. Tapered (BSPT, PT, ISO 7, ISO 228)
      Note: Look for the Global Thread emblem next to the parts picture!
  • Materials
    The latest generation of composite material is used in the body construction in addition to nickel-plated brass on threaded components
    and stainless steel on the tube gripper.
Technical Characteristics
Body Composite
Body Nickel Plated Brass
Tube Release Acetal Resin
Retainer Nickel Plated Brass
Gripper Ring Stainless Steel
Spacer Composite
Thread Packing NBR 70
O-Ring NBR 70
Thread Seal NBR 70