Valves

Female Full Port
Female NSF 61
MIP x FIP Full Port
SWT x SWT Full Port
FIP x FIP Forged Brass
Gas Ball Valves
Chrome Plated Brass
Full Port Brass Gate
Y-Pattern Strainer
Brass Swing Check Valves
Brass Check Valves
Standard Port Carbon Steel
One Piece Standard
1000 PSI 2 PC Full Port
SS Check Valve
White PVC Ball Valves
Plastic Drum Faucets



F x F Full Port 600WOG Forged Brass Ball Valve

  • SOLID CHROME PLATED BRASS BALL
  • Suitable for full range of liquids and gases
  • Minimal pressure drop due to large full size ports
  • Bottom loaded, pressure retaining stem
  • Pressure rated at 600psi (42 bars) WOG (non-shock) and 150 WSP (10.34 bars) saturated steam. Virgin TFE stem packing seal, thrust washer and seats
  • Yellow vinyl insulator on heavy duty plated carbon steel handles
  • Fast 1/4 turn open or close operation
  • Low operating torque
  • Flow can go both directions
  • Adjustable stem packing gland
  • Maximum operating temerature: 248°F (120° C) at 600 PSI
  • Minimum operating temperature: -20°F (-40°C)
  • Each valve individually tested
  • Forged Brass - for more strength
  • Threaded ends to ANSI B1.20.1
  • Hard chromium plated solid ball
  • Bottom entry, blow-out proof stem
  • Deeper threads - for better connections
  • 600 PSI non-shock cold water, gas, oil 150 PSI saturated steam
  • 150 PSI saturated steam
  • Nickel plated body available upon special request.
  • Optional stainless steel parts available upon special request.

    Components Material
    Body Forged Brass
    End Connection Forged Brass
    Ball CP Brass
    Ball Stems P.T.F.E.
    Stem Antif. Seat P.T.F.E.
    Stem Seat P.T.F.E.
    Brass Ring Brass
    Stem Brass
    O-Ring NBR 80
    Handle Steel
    Nut Steel
    Nut Brass


F x F NSF 61 Full Port 600 WOG Forged Brass Ball Valve
  • NSF approved for drinking water applications
  • 600 PSI non-shock cold water, gas, oil 150 PSI saturated steam
  • Suitable for full range of liquids and gases
  • Virgin TFE stem packing seal, thrust washer and seats
  • Blue vinyl handle cover
  • Solid chrome plated brass ball
  • Adjustable stem packing gland
  • Threaded ends to ANSI B1.20.1
  • Bottom entry, blow-out proof stem

    Components Material
    Body Forged Brass
    End Connection Forged Brass
    Ball CP Brass
    Ball Stems P.T.F.E.
    Stem Antif. Seat P.T.F.E.
    Stem Seat P.T.F.E.
    Brass Ring Brass
    Stem Brass
    O-Ring NBR 80
    Handle Steel
    Nut Steel
    Nut Brass


MIP x FIP Full Port 600WOG Forged Brass Ball Valve
  • Solid chrome plated brass ball
  • Suitable for full range of liquids and gases.
  • Minimal pressure drop due to large full size ports.
  • Bottom loaded, pressure retaining stem.
  • Pressure rated at 600psi (42 bars) WOG ( non-shock) and 150psi (10.34 bars) saturated steam. Virgin TFE stem packing seal, thrust washer and seats.
  • Yellow vinyl insulator on heavy duty plated carbon steel handles.
  • Fast 1/4 turn open or close operation.
  • Low operating torque.
  • Adjustable stem packing gland.
  • Maximum operating temperature: 248°F (120°C) at 600 p.s.i
  • Minimum operating temperature: -20°F (-40°C)
  • KV: Pressure drop m^3/h.
  • Each valve individually tested.
  • Forged Brass - for more strength.
  • Threaded ends to ANSI B1.20.1
  • Hard chromium plated solid ball
  • Bottom entry, blow-out proof stem.
  • Deeper threads - for better connections.

    Components Material
    Body CW617N Forged Brass
    End Connection CW617N Forged Brass
    Ball CW617N CP Brass
    Ball Stems P.T.F.E.
    Stem Antif. Seat P.T.F.E.
    Stem Seat P.T.F.E.
    Brass Ring CW617N Brass
    Stem CW617N Brass
    O-Ring NBR 80
    Handle UNI EN 10025 Steel
    Nut UN 5771 Steel
    Nut CW617N Brass

SWT x SWT Full Port 600WOG Forged Brass Ball Valve
  • Minimal pressure drop due to large full size ports.
  • Bottom loaded, pressure retaining stem.
  • Pressure rated at 600psi (42 bars) WOG (non-shock) and 150psi (10.34 bars) saturated steam. Virgin TFE stem packing seal, thrust washer and seats.
  • Vinyl insulator on heavy duty plated carbon steel handles.
  • Fast 1/4 turn open or close operation
  • Low operating torque
  • Adjustable stem packing gland.
  • Maximum operating temperature: 248°F (120° C) at 600 psi
  • Minimum operating temperature: -20°F (-40°C)
  • Each valve individually tested.
  • Forged Brass - for more strength.
  • Tube ends to ANSI B16.22.
  • Hard chromium plated solid ball.
  • Bottom entry, blow-out proof stem.
  • Use with ASTM B88 copper water tubing.
  • 600 PSI non-shock cold water, gas, oil
  • 150 PSI saturated steam (WSP)

    Components Material
    Body Forged Brass
    End Connection Forged Brass
    Ball CP Brass
    Ball Seats P.T.F.E.
    Stem Brass
    O-Ring NBR 80
    Handle Steel
    Nut UNI 5771 Steel
    Stem Seat P.T.F.E.
    Brass Ring Brass
    Stem Seat P.T.F.E.
    Nut Brass

FIP x FIP Forged Brass Ball Valve - Standard Port
  • Solid chrome plated brass ball
  • Threaded ends to ANSI B1.20.1
  • Each Valve individually tested
  • Hard chromium plated solid ball
  • Bottom entry, blow-out proof stem
  • Double stem packing, Teflon seats.
  • 400 PSI non-shock cold water, gas, oil
  • 150 PSI saturated steam (WSP)

    Components Material
    Body Forged Brass
    End Connection Forged Brass
    Ball CP Brass
    Ball Stems P.T.F.E.
    Stem Antif. Seat P.T.F.E.
    Stem Seat P.T.F.E.
    Brass Ring Brass
    Stem Brass
    O-Ring NBR 80
    Handle Steel
    Nut Steel
    Nut Brass

Gas Ball Valves
  • Solid chrome plated brass ball
  • Bottom entry
  • Blow out proof design.
  • Double viton o-rings stem seals
  • Teflon seats for durability.
  • Forged construction for greater strength
  • Larger ports for increased flow capacity.
  • For use with natural, manufactured, mixed Liquified. petroleum and LP gas-air mixtures.
  • Deeper thread connections. Smooth quarter-turn.
  • Manufactured to ANSI Z21.15, C.G.A. 9.1-M81, 9.2-M88, 1/2 psig. 372 also to A.G.A. 3-8, C.G.A. CR91-002, 2 psig.
  • Red Reversible handle.
  • May be used with water 400 WOG.

    Components Material
    Body Forged Brass
    End Connection Forged Brass
    Ball Forged Brass
    Ball Seat P.T.F.E.
    Stem Brass
    O-Ring NBR
    Butterfly Steel
    Screw UNI 5771 Steel

Chrome Plated Brass Mini Ball Valves
  • Solid chrome plated brass ball
  • Max working pressure 235 psi
  • Longer body style for longer, deeper thread connections
  • One piece drawn sand blasted chrome plated body.
  • Each valve is seal tested for maximum safety.
  • Double seal system allows valve to be operated in both directions making installation easier.
  • Blowout-proof brass stem.
  • NPT taper ANSI B1.20.1 threads.
  • 32° to +176° temperature.
  • 1/4 Turn Nylon handle with mechanical stop.
  • NSF Approved valves available upon request!

    Components Material
    Body CW517N Forged Brass
    Ball Seats P.T.F.E.
    Ball CW517N CP Brass
    Ring Unit CW614N Brass
    Stem CW614N Brass
    Screw UNI 5771 Steel
    Handle Nylon
    O-Ring NBR 80

Full Port Brass Gate Valve
  • Brass Forged body/bonnet- stronger than sand castings.
  • Superior quality and finish.
  • Each valve individually tested.
  • Threaded ends to ANSI B1.20.1, Solder ends to ANSI B16.18
  • Non rising stem.
  • Cast iron handle.
  • 200 WOG (Cold water, oil, gas)
  • 125 WSP (Saturated Steam)

    Description Material
    Body Brass
    Disc Brass
    Stem Brass
    Bonnet Forged Brass
    Lock Nut Brass
    Packing NBR
    Gland Brass
    Packing Nut Brass
    Handwheel Cast Iron
    Handwheel Nut SS41

Class 150 Bronze Y-Pattern Strainer
  • Protects regulators, pumps, meters and other controls from damage due to sediment scale, metal chips or other foreign materials
  • Threaded ends
  • 300 psi WOG non-shock
  • 150 psi SATURATED STEAM
  • Screwed cap is threaded & gasketed
  • Tapped drain plug opening in cap
  • 304 stainless steel screen #20 mesh
  • Self cleaning
  • Self cleaning can be accomplished by opening the valve or plug connected to the blow-off outlet
  • Hydrostatic test pressures shell 450 P.S.I.

    Part Name Material
    Body Bronze
    Cap Bronze
    Screen SS-304
    Gasket Non-Asbestos
    Plug Brass
Brass Swing Check Valves
  • Working pressure non-shock: 200 psi W.O.G. (cold water, oil, gas) 125 psi WSP (saturated steam)
  • Swing type disc.
  • Screwed Cap.
  • Hard Seat.
  • 900 Straight Pattern.
  • Used to prevent reverse flow in commercial and industrial applications.
  • Threaded ends to ANSI B1.20.1
  • Integral seat.

    Description Material
    Body Cast Brass
    Disc Forged Brass
    Pin Brass
    Plug Screw Brass
    Cap Cover Cast Brass

Brass Check Valves
  • 200 WOG
  • Corrosion resistant material
  • Cast Red Brass body
  • S.S. Spring
  • Neoprene O-Ring Seal
  • Can be used vertically or horizontally
  • Individually boxed
  • Hydraulic Burst test result: 232 Kg/cm2

    Part Material
    Body Brass
    Stopper Brass
    O-Ring NBR
    Washer PE
    Spring S.S.
    Cap S.S.
    Nut S.S.

Standard Port Carbon Steel Ball Valve
  • For chemical and industrial applications.
  • Blow-out proof stem design.
  • 100% air tested under water, at 100 psi, open and closed positions.
Specifications
  • Working Pressure: 1/4” ~ 1” 2000 psi WOG, 1-1/4” ~ 2” 1500 psi WOG,
  • Temperature Range: -600 to 4500F
  • End types: Threaded
  • 1 piece ball valve reducing bore
  • Reinforced PTFE seat

    Parts Material
    Body ASTM A108 CL. 1018 or AISI 1021 C.S.
    Unscrewed Seat Retainer ASTM A108 CL. 1018 or AISI 1021 C.S.
    Ball SS304
    Stem SS316
    Ball Seat RPTFE
    Cap Seal PTFE
    Packing PTFE
    Handle SS304
    Handle Sleeve Vinyl Grip
    Thrust Washer PTFE
    Gland SS304
    Washer SS304
    Handle Nut SS304
    Stem nut SS304

One Piece Standard Port Ball Valve
  • Yellow locking handle now standard
  • 316 Stainless Steel
  • 1000 PSI
  • Larger sizes available on special order basis
    *Dimensions may change. Please contact us if dimensions are critical.
    Parts Material
    Plastic Cover Plastic
    Handle AISI 304 SS
    Thrust Washer PTFE
    Packing Ring AISI 304 SS
    Stem Packing PTFE
    Seat PTFE
    Seat AISI 316 SS
    Stem Nut AISI 316 SS
    Ball 316SS ASTM-A351 CF8M
    Cap 316SS ASTM-A351 CF8M
    Body 316SS ASTM-A351 CF8M

1000 PSI 2 PC Full Port Stainless Steel Valve

Features:
  • Investment Casting body
  • Working pressure 1000 psi for W.O.G.
  • Adjustable stem packing
  • Pure teflon seals and seats
  • Temperature range: -60 to 450°F
  • Blow-out proof stem and safe pressure-reducing hole
  • 100% leakage tested at 100 psi air under water
  • Hydrostatic test pressure: 1500 psi
  • Locking handle w/ yellow generic sleeve
Materials: CFM8M (SS316), DIN 1.4408

1000 PSI 2 PC Full Port Stainless Steel Valve
  • Yellow locking handle now standard
  • 1000 PSI
  • 316 Stainless Steel
  • Larger sizes available on special order basis
    *Dimensions may change. Please contact us if dimensions are critical.
    Parts Material
    Body 316 SS ASTM-A351 CF8M
    Body Cap 316 SS ASTM-A351 CF8M
    Ball 316 SS ASTM-A351 CF8M
    Seat Reinforced PTFE
    Stem AISI 316 SS
    Seal Reinforced PTFE
    Thrust Washer Reinforced PTFE
    Packing Reinforced PTFE
    Gland Nut AISI 304SS
    Nut & Washer AISI 304SS
    Handle AISI 304SS
    Plastic Cover Plastic

Stainless Steel Check Valve
  • No Lead
  • Water wells need a check valve installed above the pumps between lengths of drop pipes
    Part Material
    Body SS 304
    Stopper SS 304
    O-Ring Viton
    Washer PE
    Spring SS 304
    Cap SS 304
    Nut SS 304

White PVC Ball Valves
  • Quarter turn
  • Solvent ends comply with ASTM D2466
  • Designed for use in residential, commercial & industrial system as well as waste water, chemical, agricultural applications, marine, food processing, and swimming pools
  • Corrosion resistant
  • EPDM seal
  • EPDM O-ring
  • Fits both Sch. 40 & 80 pipe
  • NSF approved
  • Rated for 150 PSI at 730
  • Threaded ends comply with ANSI B1.20.1

Plastic Drum Faucets
  • Pipe threads to ANSI B1.20.1
  • Hose threads to ANSI B 1.20.7

    Flo-Rite


    The FLO-RITE faucet has been engineered to meet the demand for greater chemical resistance, using linear polyethylene for the stem.

    Specification Data
  • Body made of high-density polyethylene for greater strength and more positive thread engagement. Stem made of low density for more positive seal
  • Not affected by most acids, caustics or oils. Will eliminate chemical reaction and contamination of products in drums.
  • Lightweight yet strong and rugged two-piece construction. Eliminates mechanical difficulty.


    Flo-King

    The FLO-KING faucet made of virgin polyethylene easily handles viscous materials.
    The faucet shoulder and gasket - made of EPDM material - providing a leakproof seal.

    Specification Data
  • Constructed of highest quality virgin polyethylene.
  • Molded of attractive metallic gold plastic.
  • Not affected by most acids, caustics or petroleum products


*Caution: Never use this product in temperatures exceeding 125° F or with a heated container.
Failure to follow these instructions can lead to a hazardous condition